Xilinx ML507 Bedienungsanleitung PDF herunterladen (Seite 9)

Verify Factory Default Settings

• Set the Ethernet PHY jumpers, J22, J23 to positions 1-2 (1)

• Insert the Factory CompactFlash into the ML507 board (2)

• Set the Front DIP switches (SW3) to 00010101 (1 = ON) (3)

• Set the Rear DIP switches (SW6) to 11001010 (4)

• Power-up the ML507 board

Note: Presentation applies to the ML507

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 32 33

Keine Kommentare

Xilinx ML507 Bedienungsanleitung Seite 9